CLI Commands
VPN
1214 Avaya G450 CLI Reference
Syntax
[no] crypto isakmp nat keepalive [
seconds
]
Parameters
User Level
read-write
Context
general
Example
To enable NAT Traversal keepalive for an interval of 60 seconds:
G450-001(super)# crypto isakmp nat keepalive 60
Related Commands
crypto ipsec nat-transparency udp-encapsulation
,
crypto isakmp peer
Use the
crypto isakmp peer
command to enter the crypto ISAKMP peer context and
create or edit an ISAKMP peer. Use the
no
form of the command to delete a remote VPN peer.
Note:
Note:
You cannot delete an ISAKMP peer that is referenced by a crypto map; you must
first delete the peer from the crypto map by entering crypto map context using the
crypto map
command, and then delete the peer using the
no set peer
command.
Syntax
[no] crypto isakmp peer {address
peer-address
| fqdn
fqdn-str
}
Parameter
Description
Possible
Values
Default
Value
seconds
The number of seconds between NAT
Traversal keepalive messages
5-3600
Summary of Contents for G450 Manager
