Avaya G450 Manager, Cli Reference Manual

Page: 1077 / 1334

SNMP access configuration
Issue 1 January 2008 1077
Context
general
Example
To display configuration information for all SNMP views:
G450-001(super)# show snmp view
View Name: iso
Subtree Oid: 1
Subtree Mask:
View Type: include
Storage Type: nonVolatile
Status: active
Related Commands - SNMP access configuration
ip snmp , set snmp community , set snmp retries , set snmp timeout , show snmp , show snmp
engineID , show snmp group , show snmp retries , show snmp timeout , show snmp user , show
snmp usertogroup , snmp-server community , snmp-server engineID , snmp-server group ,
snmp-server remote-user , snmp-server user , snmp-server view
Related Commands - SNMP trap configuration
set port trap , set snmp trap enable | disable auth , set snmp trap enable | disable frame-relay ,
show port trap , show snmp , snmp trap link-status , snmp-server enable notifications ,
snmp-server host , snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server community
Use the
snmp-server community
command to enable read-only and read-write access to
SNMP services via community strings. Use the
no
form of the command to prevent access to
SNMP services using community strings. By default, community string access is enabled.
Syntax
[no] snmp-server community read-only community-name read-write
community-name