Avaya G450 Manager, Cli Reference Manual

Page: 1069 / 1334

SNMP access configuration
Issue 1 January 2008 1069
Example
To set the system to wait 60 seconds before retrying communications:
G450-001(super)# set snmp timeout 60
Related Commands - SNMP access configuration
ip snmp , set snmp community , set snmp retries , show snmp , show snmp engineID , show snmp
group , show snmp retries , show snmp timeout , show snmp user , show snmp usertogroup , show
snmp view , snmp-server community , snmp-server engineID , snmp-server group , snmp-server
remote-user , snmp-server user , snmp-server view
Related Commands - SNMP trap configuration
set port trap , set snmp trap enable | disable auth , set snmp trap enable | disable frame-relay ,
show port trap , show snmp , snmp trap link-status , snmp-server enable notifications ,
snmp-server host , snmp-server informs
show snmp
Use the
show snmp
command to display SNMP configuration information.
Syntax
show snmp
User Level
read-only
Context
general
Example
To display SNMP configuration information:
G450-001(super)# show snmp
Authentication trap disabled
Community-Access Community-String
---------------- ----------------
read-only *****
read-write *****