Basic Voice Terminal Operations
24
Issue 5 August 2005
Select Ring (and Ringer Volume)
To select a personalized ring
NOTE:
There are eight different ringing patterns from which to choose.
1. Press
.
■
Green light next to
goes on steadily.
2. Press
.
■
Green light next to
winks.
■
Current ring pattern plays and repeats every three seconds.
■
Display shows the pattern you are currently hearing:
(“x” will be a number from 1 to 8.)
3. Continue to press
to cycle through all eight ring patterns.
4. When you hear the desired ring pattern, press
again.
■
Your new ring is set; the light next to
goes off.
NOTE:
If you receive a call, go off-hook, or lose power during selection, the
process is interrupted and you must start again. If you lose power
after
you have selected your personalized ring, you will have to select
your ringing pattern again.
You can raise or lower the volume of the tone ringer under the following
conditions:
■
The CALLMASTER IV is on-hook, and the headset is unplugged.
■
The voice terminal is off-hook on the external speakerphone.
■
A call is ringing at the voice terminal.
■
You are in the process of selecting a personalized ringing pattern for
your voice terminal.
Select
Select
Conference
Ring
Select
Personal Ring #x
Conference
Ring
Select
Select
Summary of Contents for Definity Callmaster IV
Page 2: ......
