manualshive.com logo in svg

Avaya BSGX4e, Installation Manual

Share
Download
Avaya BSGX4e Installation Manual Download Page 49

7

R

ULE

 C

OMPLIANCE

This appendix lists the standards compliance statements for the BSGX4e Business 
Gateway device.

FCC Compliance (US)

This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions:

„

This device may not cause harmful interference.

„

This device must accept any interference received, including interference that 
may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
device generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this device creates harmful interference to radio 
or television reception, the user is encouraged to correct the interference by one or 
more of the following measures:

„

Re-orient or relocate the receiving antenna.

„

Increase the separation between the equipment and receiver.

„

Connect the equipment to an outlet on a circuit different from that to which the 
receiver is connected.

„

Consult the dealer or an experienced radio/TV technician for help.

The BSGX4e is not hearing aid compatible.

FCC Telecom Statement

This device complies with Part 68 of the FCC rules and requirements adopted by the 
American Council of Trustees and Alumni (ACTA). On the bottom of this device is a 
label that includes, among other information, a product identifier in the format 
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone 
company. 

„

The Universal Service Order Codes (USOC) for this device (BSGX4e) are

________________________________________________________________.

„

The Facility Interface Codes (FIC) and the Service Order Codes (SOC) for this 
device (BSGX4e) are 02LS2 and 9.0F, respectively.

Summary of Contents for BSGX4e

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands