manualshive.com logo in svg

Avaya BSGX4e, Installation Manual

Share
Download
Avaya BSGX4e Installation Manual Download Page 29

29

BSGX4e Business Gateway Installation Guide

NN47928-303

Release 01.01

Figure 5. Reload Button

Defaults button in Web UI

The default configuration can be restored from the Web UI. (The procedure for 
logging on to the Web UI is described in 

Log in to the Web User Interface (page 32)

)

Note: When the unit is restored to factory default settings, all remote 

connections to the unit are lost. This includes the Web UI connection.

The Operations menu shown as follows includes a 

Defaults

 button.

When the 

Defaults

 button is clicked, you are asked to confirm the change. If you 

confirm, the following message appears:

The system reload disconnects the Web UI from the BSGX4e device. The IP addresses 
for the BSGX4e data interfaces are restored to their defaults. 

     Reload 

   button

Click 

Defaults

 to restore the default configuration.

Click 

Defaults

 to restore the default configuration.

Summary of Contents for BSGX4e

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands