b.
To connect the Avaya PoE injector to the WLAN AP 8120-O, see
Installing the
Power over Ethernet injector
on page 66.
Installing the WLAN AP 8120-O on a wall
Complete the following procedure to mount the WLAN AP 8120-O on a wall.
Procedure
1. Mark the four locations of the mounting holes on the plane bracket on to the wall.
Figure 21: Marking holes on a surface
2. Drill an 8 mm- diameter hole with a depth of 36 mm to 38 mm into each of the
markings.
Installing the WLAN AP 8120-O on a wall
Avaya WLAN 8100 Installation – AP 8120 Series
April 2012 57
