Figure 27: Open Ethernet surge arrester showing ground screw and RJ-45 connectors
4. Connect the other end of the wire to a proper Earth ground.
5. Insert the Ethernet cable running from the Ethernet/PoE equipment into one of the
RJ-45 connectors in the Ethernet surge arrester.
6. Insert the
wateproofed
end of the Ethernet cable into the bottom of the WLAN AP
8120-O, tightening in place by hand. See the waterproofing the Ethernet UTP cable
section,
Waterproofing the Ethernet UTP cable
on page 28 for waterproofing the
Ethernet cable.
Outdoor access point installation
64 Avaya WLAN 8100 Installation – AP 8120 Series
April 2012
Comments? [email protected]
