Avaya AP-1, Getting Started Manual, Page: 23 / 36

Access Point-I - Getting Started Guide 3-9
Using the Access Point-I - Remove the Cover Plate
Connect a Range Extender Antenna
3. Remove the protective cap
(a)
from the PC Card, and connect the
antenna cable to the PC Card.
4. Next, guide the cable through recess
(b)
as pictured in Figure 3-5, and
close the module again.
Figure 3-5 Inside the Access Point-I
Lock the Access Point-I to its Wall
Bracket
To lock the Access Point-I to its wall bracket, open the module as described
in “Remove the Cover Plate” on page 3-8.
Verify that the module is properly seated on the wall bracket and insert the
provided screw in the prepared hole at point
(c)
as pictured in Figure 3-5.