Avaya AP-1, Getting Started Manual, Page: 12 / 36

2-6 Access Point-I - Getting Started Guide
Install your Access Point-I - Power up your Access Point-I
Power up your Access Point-I
To power up the Access Point-I, connect the unit to a grounding type AC
wall-outlet (100-240 VAC) using the standard power adapter as supplied with
the unit.
Placement must allow for easily disconnecting the unit from the AC wall-
outlet.
When powered on, the unit will perform start-up diagnostics characterized by
a LED sequence. The LEDs will change color in the range Amber, Red and
Green.
When finished (after about 15 seconds) the Access Point-I will start
operation characterized by the LED activity as listed in Table 2-5.
Table 2-5 LED Activity Table
LED activity will only occur when there is network activity on the
corresponding Access Point-I network interface.
If the Access Point-I does not switch to normal operation within two minutes,
please consult the troubleshooting section of the “Wireless LAN Manager -
User’s Guide” (see “Finding Information” on page 1-3).
LED Definition Activity Description
Power Green Power on
Ethernet interface Flicker Green Ethernet LAN activity
Wireless interface Flicker Green Wireless LAN activity