16
Procedures for Using the Switch Features
The following features can be used no matter which communications system your
6201, 6210, or 6220 telephone is connected to. Remember that you can use the
Speakerphone and Mute features
only if
you are using a 6220 telephone.
Note:
If you are using a 6201 telephone, you CANNOT use the switchhook to
access switchhook features; that is, the switchhook CANNOT be used to insert a
switchhook flash.
Note:
The 6220 telephone has 10 programmable dialing buttons on which you can
store telephone numbers or access codes. In addition, the DEFINITY ECS Generic 1,
Generic 2, Generic 3, System 75, and System 85 allow you to store numbers in a
maximum of three Abbreviated Dialing lists.
Abbreviated Dialing
To program or reprogram
an outside number,
extension, or feature code
into a personal list
1
On a separate sheet of paper, write down the outside
numbers, extensions, and/or feature codes you want to
program as items on your personal list(s).
Note:
Each telephone number or feature code is
stored as a separate list item.
2
Pick up the handset [dial tone]
3
Dial the Abbreviated Dialing Program
code __________
[dial tone]
4
Dial the personal list number (
1, 2,
or
3
)
5
Dial the list item (
1, 2, 3...
) [dial tone]
6
Dial the number you want to program (up to 24 digits)
Note:
If you are programming an outside number, be
sure to include a trunk code, if applicable.
7
Press
[confirmation tone]
•
Number is stored
#
