Avaya 6120 User Manual Download Page 12 | Manualshive

Page: 12 / 126

background image

12

Regulatory and safety information

Charger information

Charger models Avaya 6100 Series WLAN Handsets Chargers (Single, Dual-slot and
Quad-slot Charger models).

This equipment has been tested and complies with the limits for a Class A digital
device, pursuant to Part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction

CAUTION

This equipment contains no user-serviceable parts inside.
Refer servicing to qualified service personnel.

WARNING

•

Follow standard acceptance procedures before
operating the Avaya 6120 and 6140 WLAN Handset
near life-support systems.

•

To minimize risk of interference, pacemaker users
should not carry the Avaya 6120 and 6140 WLAN
Handset next to the pacemaker.

•

Avoid placing the handset near small metallic objects.
The handset earpiece attracts magnetic objects.

•

The Avaya 6120 and 6140 WLAN Handset produce
noise noticeable to hearing aid users. Use a headset
compatible with hearing aids.

•

The Avaya 6120 and 6140 WLAN Handset complies
with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.

•

Privacy of communications cannot be ensured when
using the Avaya 6120 and 6140 WLAN Handset.

•

To prevent radio interference to the licensed service,
the Avaya 6120 and 6140 WLAN Handset must be
operated only indoors and kept away from windows to
provide maximum shielding.

«
...
10
11
12
13
14
...
»

Summary of Contents for 6120































































































































Reviews:

No comments

Related manuals for 6120

Clearspan 6731i

Brand: Aastra Pages: 3

Brand: Aastra Pages: 18

Brand: Aastra Pages: 8

Brand: Aastra Pages: 97

Brand: Aastra Pages: 7

Brand: Aastra Pages: 104

Brand: Aastra Pages: 74

Brand: Aastra Pages: 100

DXAI5688-2 - DXAI Cordless Phone

Brand: Uniden Pages: 68

Brand: Uniden Pages: 72

Brand: Facebook Pages: 5

Clear Sound CL455

Brand: Geemarc Pages: 64

Brand: JabloCom Pages: 2

ICARUS 200 SYSTEM

Brand: Binatone Pages: 2

Brand: Uniden Pages: 20

Amplidect Combi 295

Brand: Geemarc Pages: 2

Brand: Zte Pages: 14

Brand: Panasonic Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands