2 Installing the Telephone
Charge the Spare Battery
25
Installation and Use
Charge the Spare Battery
It is recommended that you have a spare battery always charging to protect
against complete battery discharge. The charger unit is equipped to charge the
spare battery with or without the handset in the front slot. See
Appendix C,
“Accessories”
for information on ordering a spare battery.
1
Slide the spare battery into the rear slot in the charger unit until the
retaining clip snaps over the top of the battery.
Figure 24: Charge Spare Battery
2
Ensure that the Batt Charge indicator lights. If it does not, make sure that
the AC adapter is plugged in and that the spare battery is making good
contact with the Charger Unit.
3
Charge the spare battery for 16 to 20 hours.
4
When charging is complete, press out on the latch to remove the spare
battery for use. If you don’t need the spare battery immediately, leave it in
the charging compartment; it will not overcharge. See information about the
low battery indicator in
“Description of Icons in Handset Display” on
page 32
.
438
