manualshive.com logo in svg

Avaya 3600 Series, Installation Instructions Manual

Share
Download
Avaya 3600 Series Installation Instructions Manual Download Page 27

3600 Series Phone Installation

Page 27

15-601082 Issue 06a (21 February 2014)

IP Office

Installation:  

3.1 Required Software

Both the AVPP (if being used) and the 3600 Series phones require the correct version of software to operate correctly
with the IP Office. They load this software during power up using a TFTP transfer from a TFTP server on the LAN. Do not
proceed with installation until you have obtain the necessary software for the AVPP and 3600 Series phones.

1. IP Office Manager 

A PC on which the IP Office Manager application can run is required. This can either be a customer PC or an
installers PC for the duration of installation. The PC should also provide a serial port for connection to the AVPP for
its initial configuration. 

2. TFTP Server Software 

A PC with a fixed IP address and running TFTP server software is required. While the IP Office Manager application
can act as a TFTP server it is not supported for 3600 Series phone and AVPP installation.

3. AVPP Software: 

For 3641/3645 phones the minimum AVPP software level is 17x.028. Note that if deploying 3641/3645 phones to
an existing AVPP network, it is still be necessary to download and update the AVPP software. See 

https://support.

avaya.com/downloads/download-details.action?contentId=C2009101217368884076&productId=P0258

. 

4. 3600 Series Phone Software: 

The H323 Release 3 (117.058) software for 3600 Series wireless phones is available from the Avaya support
website. See 

https://support.avaya.com/downloads/download-details.action?

contentId=C2013117117413380_7&productId=P0853

. Load the latest version of the Avaya 3641/3645 Wireless

IP Telephone software onto the TFTP Server. The following files should be present: 

1. slnk_cfg.cfg 

2. pi1400cc.bin 

3. pd14odcc.bin 

4. pd14shim.bin 

5. pd14udcc.bin 

6. pd14ccc.bin 

5. Handset Administration Tool: 

This tool allows configuration and upgrading of phones using a PC connected to the phone's charging cradle. See 

https://support.avaya.com/downloads/download-details.action?
contentId=C201291794796550_1&productId=P0258

.

Summary of Contents for 3600 Series















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands