Avaya 3524gt, Troubleshooting Manual, Page: 85 / 88

Showing EAPOL port
Review the EAPOL port information.
1. Enter the
show eapol port <port#>
command to display the information.
2. Ensure that global EAP is enabled and that the port status is eap-auto.
Showing EAPOL multihost
Review the EAPOL multihost information.
1. Enter the
show eapol port multihost
command to display the information.
2. Note the following:
Use RADIUS To Authenticate NonEAPOL Clients is enabled
Formatting non-EAPOL RADIUS password attribute
Make the required changes on the RADIUS server to the password format.
Use vendor documentation to make required changes on RADIUS server to change the format
to
IpAddr.MACAddr.PortNumber
.
Enabling RADIUS to authenticate non-EAPOL clients
Make the required changes on the RADIUS server to authenticate non-EAP clients.
Apply changes to RADIUS server using vendor documentation.
Showing EAPOL multihost interface
Review the EAPOL multihost information.
1. Enter the
show eapol multihost interface <port#>
command to display
the information.
2. Note the following:
Allow Auto Non-EAP MHSA: Enabled
Enabling RADIUS to auth non-EAP MACs
Make the required changes on the RADIUS server to authenticate non-EAP clients
Non-EAP MHSA MAC is not authenticating
Troubleshooting March 2013 85