Avaya 1040E, User Manual

Page: 297 / 418

Multiuser
297
used. When accounts are registered on different domains, you can only
program and use speed dial keys with targets that are reachable on the
domain of the secondary account. It is possible to program and use speed
dial keys with targets that are only reachable on the domain of a
secondary account. The Speed Dial keys always uses the primary
account to determine the presence state of the target.
Instant Message keys always use the primary account, because IM
support is disabled for secondary accounts.
Inbox, outbox, IM log
There is a single inbox, a single outbox and a single instant message log
for each profile. The detailed view of the call log entry indicates the local
account associated to each entry; that is, the source of outgoing calls and
the target of received calls.
Figure 50 on page 297 shows the Inbox in call details view.
Figure 50: Inbox: call details view
Call logs and IM logs provide many ways of initiating a call to the address
identified by the selected entry, such as lifting the handset. In most cases,
the primary account is used. However, if you press a line key to initiate
the call, the call uses the account associated with the line key.
If call logs and IM logs are invoked in
selection
mode; you cannot initiate
a call directly. In this case, the
Select
context-sensitive soft key populates
a dial prompt or other input field with the selected target. The operation
already in progress determines which account to use. (For example, if
you press the line key to obtain a dial prompt, press the Inbox key to