BASIC FUNCTION
1.Turn on/off the MIDI keyboard
◇
Connectthe Type-B USB port or use 3 AA alkaline batteries(use the USB connection
and battery at the same time, USB power supply will be the priority),turn the power
switch to "ON" to turn on the MIDI keyboard.
2.Switch preset parameter groups
◇
20 different parameter groups can be set on the EMK-25.
◇
8 groups of parameter were preset, and users can customize 12 groups of parameter.
◇
Use the selection knob to switch preset parameter groups.
3.Joystick
◇
Move the joystick left and right to adjust the pitch of the note.
◇
Move the joystick up and down to transmit MIDI message, default as CC#1 message
for modulation depth.
4.Assignable Knob
◇
Send specific MIDI control information.
◇
In the MENU interface, you can set the working mode and MIDI Channel for each
knob.
5.Pads
◇
The pads can be used to send the MIDI messages, which can be used as Note, CC
commands, and Program Change values.
◇
The pad works with Aftertouch function in Note mode.
◇
The working mode of the pads can be changed and the MIDI Channel of pads can
be modified in the setting menu.
6.Octave switch
◇
The Up or down button to shift the keyboard’s range up or down, each press can
increase or decrease an octave, the default value is 0.
◇
Press the [OCT-] button to decrease one octave, the indicator light of the button will
light up once; press the [OCT-] button twice to decrease two octaves, the indicator
light of the button will flash 2 times; and so on, the indicator flashes up to 4 times.
◇
Press the [OCT+] button to add one octave, the button indicator will light up once;
press [OCT+] twice to add two octaves, the button indicator flashes twice; and so on,
up to four octaves can be added sound, the indicator flashes up to 4 times.
7.Metronome
◇
When the [ARP] or [NOTEREPEAT] functionison, the [TAP] indicator will flash at the
current metronome tempo.
◇
When using the built-in metronome, press the [TAP] button continuously at a certain
tempo to modify the tempo of the metronome.
◇
When the MIDI keyboard selects to synchronize the external metronome, the [TAP]
indicator will flash according to the external metronome tempo.
