Place the
AVARI® Recumbent Bike
in the area where it will be used. It is recommended that the
AVARI® Recumbent Bike
be placed on an equipment mat. The
AVARI® Recumbent Bike
is
approximately 49.6 inches long x 24 inches wide x 39.4 inches tall. (These dimensions may vary up to
one inch.) An area 4 feet wide x 6.5 feet long is required for safe operation of the
AVARI® Recumbent
Bike.
Make sure that adequate space is available for access to and passage around the
AVARI®
Recumbent Bike.
LEVELING:
Adjust the
LEVELING CAPS(18)
on the
REAR STABILIZER(4)
so the recumbent bike sits
on the floor without rocking. Remove and reposition the
LEVELING CAPS(18)
on the
REAR
STABILIZER(4)
to level the
AVARI® Recumbent Bike.
Adjust the
STAND(70)
under the
MAIN FRAME(1)
to get more support for the base of the
AVARI® Recumbent Bike.
MOVING:
The
AVARI® Recumbent Bike
must be lifted to be moved. Two people are required to
grasp the
HANDLEBAR(10)
and the
REAR STABILIZER(4),
lift and move.
FUNCTION INSPECTION:
Visually inspect the
AVARI® Recumbent Bike
to verify that assembly is as shown in the above
illustration. Check the function of the
AVARI® Recumbent Bike
by turning the crank slowly through one
complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(8)
and
verify that it functions properly.
CAUTION:
Locate and read the
WARNING LABEL(75)
on the
AVARI® Recumbent Bike.
Make sure
that all users read the
WARNING LABEL(75)
before using the product.
SET UP INSTRUCTIONS
12
Equipment Mat
(not included)
Adjust the
STAND(70)
until it
contacts the floor.
Summary of Contents for Recumbent Bike A150-210
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 22: ...NOTES 22...
