background image

Multi-point: pairing 2 phones simultaneously                             

Step 1 

 Connect the first phone (instructions above) then turn off its Bluetooth function.

Step 2 

 Set the CK210 into pairing mode again.

Step 3  

Turn on Bluetooth on the second phone and connect with the CK210.

Step 4 

 Reboot the CK210 by turning it off then on again. Turn on the Bluetooth on the first phone. 

Both phones will now be connected to the CK210.

Clear pairing history                                                                                    

You may need to reset the CK210 if it is not working as expected. Whenreset to its factory default 

settings, all the paired device information will be erased.

Step 1 

 Set the CK210 to PAIRING MODE – press and hold the MFB for 3 seconds until the LED flashes 

BLUE

 and

 RED

 alternately.

Step 2  

Double click the MFB – the 

BLUE

 and 

RED

 LEDs will turn on for 1 secondto indicate a successful 

reset. Then it will automatically enter pairing mode.

How to charge                                                                                                                                

When the battery runs low, the 

RED

 LED will flash every 2 seconds. Recharge the CK210 by plugging it 

into a USB car charger (not supplied) or PC USB port using the supplied charging cable. It normally takes 

1.5 hrs to fully charge the battery. The LED will indicate red when charging and turn off when charging is 

completed.

Charging requirements: DC5.0V/ 500mA-1A.

4

Bluetooth

Avantree CK210

Avantree CK210

Bluetooth

DC 5V / 0.5-1A

OR

Reviews: