OPERATION - SPACEHORN
DSP VOLUME CONTROL
The bass response of the speaker will be influenced by the room and
the position of the speaker. This might cause the bass response of
the speaker to be strengthened or weakened. Thus as the f irst step,
the overall bass volume needs to be aligned to compensate these
effects.
Press the VOL
�
–button
to increase or the VOL
�
–button
to
reduce the volume of the bass response. The set volume is indicated
in the display
.
SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
24
25
12
14
13
11
CLIP
VOL
DSP
POWER
ENGAGED
FUSE
LED
DIMMER
TOGGLE
POWER ON
MODE
A
D
B C
E FUSE
RESET
VOL
SIG
MODEL
SERVICE USE ONLY
OPERATION - SPACEHORN
DSP SOFTWARE INSTALLATION
Additional settings can be programmed with the Avantgarde
Control software.
The software can be requested by email at our service desk:
[email protected]
LAN CONNECTION TO PC
Each SPACEHORN amplif ier features 2 x LAN sockets which allow to
daisy chain all subwoofers.
Connect the LAN ports
of all SPACEHORNS with each other using
LAN–cable (type CAT5/6/7).
Connect a f ree LAN port
of one SPACEHORN with the LAN port of
your computer or with the LAN port of your WIFI router. The
Avantgarde Control software installed on your computer/laptop will
automatically detect and display all available subwoofer amps.
USB CONNECTION TO PC
If no LAN connection is available, connect your computer with an
USB cable (type A/B) to the USB port
of the SPACEHORN. This
only allows the programming of one speaker at a time.
IMPORTANT!
The LAN and the USB connectors are only to be used for
programming the subwoofer. These inputs are not suitable for the
connection of music sources!
1
1
1
2
OP
ERA
TION
SUB
OP
ERA
TION
SUB
