SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
20
21
CONNECTION - SPACEHORN
SPEAKER LEVEL INPUT
Connect the speaker terminal of the TRIO G3 speakers and the
speaker-level input terminal of the SPACEHORNS
❶
with the long
jumper cable. The jumper cable is included in the accessory box.
If you use more than 1 x subwoofer per channel, connect speaker-
level input terminal
❶
of the SPACEHORNS No.1 and speaker-level
input terminal of the SPACEHORNS No.2 with the shorter jumper
cable. The jumper cable is included in the accessory box.
�
The jumper cables have hollow banana plugs which are open at
the rear. This way it is possible to stack multiple speaker cables to
the same speaker terminal.
Only now, connect the AC power cords
of the components to a
household AC outlet and turn on the subwoofer and the other
equipment.
�
The cable at the INTERNAL CONNECT PORT
is a non-
serviceable internal connection! Do not unplug.
11
13
1
2
3
4
SPACEHORN.SINGLE–DL
BASSAMP–G3–600
MADE IN GERMANY
SPEAKER TYPE
MODEL NO.
ORIGIN
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 600W
FUSE 5.0A SLOW
INPUT
SPKR
XLR
MUTE
OUTPUT
INTERNAL CONNECT PORT
TRIGGER
GROUND
POWER
W
ARNING!
BALANCED SIGNAL
SPEAKER LEVEL INPUT
INPUT SELECT
OUTPUT TO DRIVER
SERIAL NO.
ELE
C
TRIC
AL
SHOCK
HAZARD
DO
NO
T
OP
EN!
12V DC
FOR HOME OR OFFICE USE
OUT
IN
PUSH
F
U
S
E
SPACEHORN.SINGLE–DL
BASSAMP–G3–600
MADE IN GERMANY
SPEAKER TYPE
MODEL NO.
ORIGIN
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 600W
FUSE 5.0A SLOW
INPUT
SPKR
XLR
MUTE
OUTPUT
INTERNAL CONNECT PORT
TRIGGER
GROUND
POWER
W
ARNING!
BALANCED SIGNAL
SPEAKER LEVEL INPUT
INPUT SELECT
OUTPUT TO DRIVER
SERIAL NO.
ELE
C
TRIC
AL
SHOCK
HAZARD
DO
NO
T
OP
EN!
12V DC
FOR HOME OR OFFICE USE
OUT
IN
PUSH
F
U
S
E
14
CONNECTION - SPACEHORN
BALANCED INPUT
Line level connections feature balanced XLR connectors/terminals.
The pin assignment of these follows the EIA RS-297-A standard:
PIN 1 = GND, PIN 2 = HOT, PIN 2 = COLD. Never use cables with
differing pin assignment! This will deteriorate the sound quality and
can damage the amplif iers and/or the active power modules of the
subwoofers.
Connect the line level output of your preamplif ier or ITRON module
with the balanced line level input
of the SPACEHORNS with an
XLR cable.
If you use more than 1 x subwoofer per channel, connect the
balanced XLR daisy chain output
of the SPACEHORNS No.1 and
the balanced XLR line level input
of the SPACEHORNS No.2 with
the shorter XLR jumper cable. The jumper cable is included in the
accessory box.
Only now, connect the AC power cords
of the components to a
household AC outlet and turn on the subwoofer and the other
equipment.
�
The cable at the INTERNAL CONNECT PORT
is a non-
serviceable internal connection! Do not unplug.
13
1
2
3
4
14
12
15
PUSH
2
1
3
OP
ERA
TION
SUB
OP
ERA
TION
SUB
