INSTALLATION
1. This appliance is designed to be installed built-in or free standing.
2. After plugging the appliance into a wall outlet, allow the unit to cool down for 3-4
hours before placing wine bottles or beverage cans in the appliance. This appliance is
not designed to be used in a RV (recreational vehicle) with an inverter.
3. Locate the appliance away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Ambient temperature below 15°F (59°C) or above
75°F (24°C) may hinder the performance of this appliance.
4.
Plug the appliance into dedicated, properly installed-grounded wall outlet. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized service center.
5. Do not use an extension cord or an adapter.
BUILT-IN INSTALLATION
The cutout dimension illustrated in figure (A) allows for door
swing and access to the pull-out shelves when installed as
a built-in appliance. If installing between frameless
cabinets, a ½” wide filler strip or side panel may be needed
on hinge side.
The filler strip will act as a spacer between the appliance
case and adjacent cabinet door swing. The width of the
opening must include the filter panels.
Note: The door should protrude at least 1” beyond the
surrounding cabinets and the cutout depth must be
24”.
ELECTRICAL CONNECTION
•
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
•
This appliance requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong
ground.
•
This appliance id not designed to be use with an inverter.
WARNING
I
mproper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by an authorized service center.
16
Figure A
23 1/4”
23 1/2”
