ID
:
020393
Revision:
1-00
8
© Avantes BV
12VDC Power plug
Connect the included power supply to the 12VDC power plug.
Sphere holder bottom plate
The user is able to place three different AvaSphere’s based on the ordered unit.
The bottom plate will hold the AvaSphere into position.
3.2
Settings for disable
With the disable function that is present on the I/O connector the user can disable the optical
output of the light source by setting this signal to high-level.
When the light source is used in combination with an AvaSpec spectrometer, interface cable IC-
DB26-AvaSphere-0.5 and AvaSoft, the output can be disabled or enabled by AvaSoft.
See appendix A.
Summary of Contents for AvaLight-Hal-CAL-Mini
Page 1: ......
