ID
:
020393
Revision:
1-00
7
© Avantes BV
Power LED
The green LED act as status LED for the light source when the power is turned on.
ON-OFF Switch
Choose operating mode with the ON-OFF-switch:
Switch position
Light source
OFF
OFF
ON
ON
Sphere Coupler
Place the opening of AvaSphere-..-IRRAD around the Sphere coupler.
I/O connector
For automatic disable control to be controlled by software it is needed to connect an AvaSpec
spectrometer to the AvaLight-HAL-CAL-Mini with the interface cable IC-DB26-2.
The signals on the I/O connector are described below.
Pin configuration
Pin Name
Description
8
Vout
Output
Nominal 12VDC output
10
GND
Ground
11
Disable
Input
Input, used to disable/shut down the output
Below the electrical characteristics for the input signals.
Electrical characteristics
Name
Low level detection High level detection Maximum voltage
Disable
< 1.0V
> 2.0V
13.2V
Sphere holder
bottom plate
Sphere Coupler
Summary of Contents for AvaLight-Hal-CAL-Mini
Page 1: ......
