User Manual
12 www.AvantcoEquipment.com
CAUTION!
Do not use the device without having frying oil in the oil container. Make sure the oil level is always between
„MIN“-and „MAX“-marking of the oil container.
WARNING!
Danger of fire! When the oil level goes below the minimum marked MIN, there is an increased risk of
oil catching fire. Danger of burns! When the oil level is above the maximum marked MAX, hot oil may
spill out.
CAUTION!
Use liquid fat for frying only. Solid frying fat (block or brick grease) should be removed preliminary!
WARNING!
Danger of burns! Do not use stale oil for frying, as a lower combustion temperature may cause the oil to
foam and ignite easily. It also emits more smoke and odor.
Change frying oil regularly. Stale oil, after cooling, should be carefully poured into a container and disposed of in
accordance with environmental regulations. Connect the drain extension to the drain valve. Put an empty container
underneath the drain extension pipe. To drain oil from the frypot, grasp the drain valve handle on the drainage valve and
rotate the handle. Switch the device on by means of the ON/OFF switch. The green power control lamp flashes up.
Set the temperature control clockwise to the desired temperature 120°F (49°C) and 374°F (190°C).
The orange heating control lamp flashes up during the heating process and extinguishes after the adjusted temperature
has been reached. The fryer is equipped with a thermostat for temperature regulation. Once the temperature in the oil
container decreases the device initiates the heating process and the orange heating control lamp flashes up.
WARNING! Danger of burn! During the work, chips and oil in the oil container become very hot and there is
a danger of catching fire. Rotate the thermostat back to starting position and turn off the main on/off switch
as soon as the deep-frying process is finished and the device is not being used.
o For best results you should wait until the desired temperature has been reached before
placing the frying goods in the fryer.
Thermostat
Reset(Hi-Limit)
