User Manual
10 www.AvantcoEquipment.com
5. Installation and operation
5.1 Safety instructions
WARNING! Risk of electric shock!
All wiring connections for this appliance must be made in accordance with the wiring diagram(s) furnished
with the appliance. Refer to the wiring diagram(s) affixed to the inside of the appliance door when installing
or servicing this equipment.
Never allow the power cable to come into contact with heat sources or sharp edges. The power cable should not hang
over the side of the working surface. Ensure that no one can step on or trip over the cable.
The power cable must not be folded, bent or tangled, and must always remain fully unrolled.
Never place the device or other objects on the power cable.
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep away the cable from operating range
and do not dunk it into water.
Do not use the device in case it does not function properly, has been damaged or dropped.
Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be danger-
ous for the user or lead to damages of the device or personal injury, and further, the warranty expires.
Do not move or tilt the device when in operation.
During operation of the unit your hands, the ON/OFF switch must be dry.
Do not leave the unit unattended during operation since there might occur malfunctions which could result in overheat-
ing of the oil (fat). In case of high temperatures oil (fat) might ignite.
You may not use moisten frying goods. Always remove the extra ice from deep frozen goods first. Even the smallest
water drops may cause oil splashes or lead to explosions during frying.
NOTE! Overly wet foodstuffs or too large a quantity of food causes excessive foaming of oil during frying.
Do not leave any frying goods in the basket hanging over the container with the hot oil.
The fryer may not be moved or repositioned as long as the oil is hot. The oil must cool down first.
Risk of injury! Hot oil splashes and fat explosions respectively may cause burns at hands and face!
5.2 Installation and connection
CAUTION! The device MUST be installed by a qualified specialist only.
Discard the complete packing material after unpacking the device.
Place the device on top of a solid, even, safe and stable surface that tolerates the weight.
Not at any time you should place the device on top of an inflammable surface (such as: table cloth, carpet, etc.).
You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other
heat sources.
A minimum of 24-inches (600-mm) clearance should be provided at the front of the fryer.