User Manual
www.AvantcoEquipment.com 11
Avoid installation spots with close contact to water.
Remove the lid, basket, handle and other accessories from the device.
Do not allow grease to accumulate or harden on the frame or body of the fryer. Clean the fryer inside and out with a
solution of detergent and hot water daily. Dry the unit thoroughly!
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation! Before installation the local power grid specifi-
cation should be compared with that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
5.3 Operation
CAUTION! The operation of the device may only be carried out by personnel that have been instructed in
operation of the device and the special hazards of frying.
There is an orange heating indicator light on the front panel. The heating indicator would cycle on and off to keep the
set temperature. The on/off switch controls the power supply.
Ensure that the device is switched off (Temperature control toggle is in position “0“).
There may be no oil at all in the oil container before filling it with oil. The oil container must be clean and dry.
The oil drainage valve must be closed. Carefully fill the oil frypot with oil up to the required level (between „MIN“-and
„MAX“-marking in the container). Markings are at the back part of the frypot.