Avant e5
71
.
DANGER
High-pressure ejection of fluid may penetrate skin and cause
serious injuries. - Never handle pressurised components.
Before handling hydraulic components, make sure that the hydraulic
system of the attachment and the loader are completely
depressurised. Do not hold your hand near a fitting when tightening or
opening it, and never use hands to search for leaks. If a leak is
suspected, set a piece of cardboard to detect a leak.
Seek medical attention immediately in case hydraulic fluid is injected
through the skin. Also skin contact with the oil can be harmful, wash
hands thoroughly after contact with oil.
Falling of load - Risk of crushing
WARNING
Always secure the loader boom
with the provided service support,
before going under the loader
boom. Remove any load and
attachments from the loader before
service or maintenance.
Access to electric motor
compartment
WARNING
Risk of burns - Allow loader to
cool before opening covers.
Electric and hydraulic parts may be
extremely hot after use.
The adjacent warning label is
located visibly below the rear
cover. Hot areas include the
hydraulic components and hoses,
and surfaces of electric motors and
inverters.
WARNING
Risk of injury from injected
hydraulic oil and burns - Never
operate loader or attachments if
there are hydraulic leaks. Check
hydraulic hoses and components
only when the loader is safely
stopped and hydraulic pressure is
released. Repair all leaks as soon
as
you
have
noticed
them,
because a small leak can quickly
change into a big one. Leaking
hydraulic fluid can cause serious
personal injuries and is also
harmful to the environment.
Consider the environment
The fluids in the machine are
harmful to the environment.
Never allow fluids to leak in the
environment.
Take waste oil and fluids to
recycling station. Find out about
your
local
requirements
concerning the recycling or
disposal of other components.
https://tractormanualz.com
