Avant e5
69
To ensure that water is added to all
battery cells, add water while the
loader is on level ground.
Never use tap water or bottled
drinking water to fill batteries.
Use only purified water that is
intended for battery use. Store
water
carefully
to
avoid
its
contamination. Tap and even the
purest
bottled
drinking
water
contains
minerals
and
other
impurities that will spoil the battery
quickly.
If you are unsure about the water,
check that the distilled water
complies with standard DIN 43530
part 4 and that the container is
marked accordingly.
Battery watering connector on battery pack
Find the hose and connector for water fill system on
top of the battery. Connect the quick connector of
watering system to this counterpart.
Watering procedure
The battery pack is fitted with watering connector
which allows to add water to all battery cells from a
single point.
The water container must be lifted high enough from
the ground. Recommended height for the water tank
is 2-3 metres higher than the top of the battery
surface. This ensures that the water pressure will be
high enough that all battery cells will be filled.
A breather cap on water container must be opened,
so that water can flow freely.
1.
Clean the water hose connectors of the battery
and the watering system.
2.
Connect the watering connector to the quick
connector on the battery. Water will start to
flow, and the flow indicator on the hose will
spin.
Use only purified battery water. Even the
cleanest drinking water contains enough
dissolved minerals and impurities to damage
the battery.
3.
When the indicator stops, the battery is fully
watered.
Watering may take up to 5 minutes to complete.
Watering system in freezing temperatures
If you store the loader in a cold place, where ambient
temperature drops below 0ºC, the water of the
watering system can freeze. In case the watering
system gets frozen, take the loader to a warm place
and allow the system to melt. Freezing of the
watering system will not cause additional damage.
For the best current capacity, it is recommended to
use and store the loader in temperatures between
+10ºC and +30ºC.
Never add any additives to battery.
Risk of acid spill - Add only pure battery water
WARNING
Never add battery acid to the
battery. Only water is evaporated
during charge cycles. Addition of
any other substance than water
can react chemically and spill
corrosive acid.
https://tractormanualz.com
