7 (26)
3.
Safety instructions for using the attachment
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
DANGER
Misuse, careless use, or using an attachment that is in poor condition, may
cause risk of serious injuries.
Familiarise yourself with the controls of the loader,
correct coupling procedure, and the correct way to operate the attachment at a safe
area. Study especially how to stop the equipment in a safe manner. Read all safety
precautions carefully.
Read all safety instructions carefully before handling the attachment
WARNING
When attaching an attachment to the loader,
ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader.
Never lift or move an unlocked attachment.
The Timber grab with rotator is designed to be used by one operator at a time. Do not
let others near the danger area of the equipment when it is in use.
Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
The operating area must be well lit. Use the work lights of the loader and other light
sources as necessary.
Drive slowly and carefully on inclined terrain or slippery surfaces. Avoid sudden
changes in speed or direction to maintain balance of the loader especially on uneven
surfaces or hills.
Always keep a safe distance of at least two metres between the attachment and any
persons.
Watch out for the strong grapple. Keep hands and feet away from moving parts, and
make sure that the attachment can’t move before going near it.
Carrying heavy loads can shift the centre of gravity of the loader and lead to tipping
over of the loader. Always transport the load as low and close to the machine as
possible with the telescopic boom completely retracted to keep the centre of gravity
low and for the best stability.
Keep the loader articulation in straight position when handling heavy loads. When
turning the articulation, the loader may tilt forward.
Observe maximum load indicated in the operator’s manual of the loader. Be
especially careful when the load sensor indicator is activated.
Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to the driver's area, loose rocks, and slippery
surfaces.
Never use the attachment to lift or to transport persons or as any kind of work
platform even temporarily.
