background image

6 (26) 

 

 

 

 

2.

 

Designed purpose of use 

The AVANT Timber grab with rotator is an attachment that is designed and manufactured to be used with 

AVANT multi-purpose loaders shown in Table 1. The timber grab is intended for lifting and stacking of tree 

trunks, branches, or other similar materials. Rotating grab makes it possible to move materials sideways or 

parallel to the machine. The timber grab equipped with hydraulic rotator makes it easy to move materials in 

tight spaces and makes it possible to load materials e.g. to trailers or stacks in any direction. 
The strong hydraulic grapple allows firm grip of lifted material. The freely rotating model allows to turn the 

material in desired position manually or by pushing against the ground. The hydraulically rotating model 

makes it easy to drive on narrow areas, and makes it easy to rotate the load into correct position for loading 

on a trailer or for stacking. The hydraulically operated rotation is selected with an electric switch, or a switch of 

the attachment control switch pack. 
The timber grab with rotator is not designed for any other use than specified and must not be used for any 

other purposes than intended.  

 

The attachment has been designed to require as little maintenance as possible. The operator can perform 

regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and 

maintenance operations are to be left for professional maintenance. All maintenance work must be done using 

proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by 

using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer. 
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your 

AVANT retailer if you have additional questions about the operation or maintenance of the equipment, or if 

you require spare parts or maintenance services. 

 

Table 1 - Timber grab with rotator - Compatibility with Avant loaders 

Avant 

220

 series 2

 

225 

225LPG 

313S 
320S 

420 
423 
523 

520 

R20 

525LPG 

R28 

528 
530 

630 

R35 

635 
640 

745 
750 

755i 
760i 

e5 
e6 

A37456 

 

 

 

 

 

 

A37457 

 

 

 

 

 

 

 

 

Summary of Contents for A37456



























Reviews: