background image

 

 

9 (28) 

 

 

 

 

WARNING

 

Risk of crushing -  Never allow anyone to get under a 
lifted attachment or loader boom.

  Keep in mind that the 

loader boom can be lowered or tilted even if the engine has 
been shut down (crushing hazard). The loader is not intended 
to be left to keep a load elevated for longer periods. Always 
lower the attachment to a safe position before leaving the 
driver's seat. 

 

 

 

 

 

 

WARNING

 

Hazard of thrown objects - Keep bystanders away.

 Note 

that the attachment can throw stones, gravel, or other objects 
found in the area at high speed. Always keep a safety 
distance of at least 5 metres to other persons. 

 

 

 

 

 

 

 

WARNING

 

Entanglement hazard -  Keep away from moving parts.

 

Keep a safety distance of at least 5 metres from the 
attachment when it is running and stop the attachment 
immediately if anyone gets too close. Beware of the rotating 
parts which create entanglement hazard. Never reach into a 
running attachment by any means. Shut down the loader 
engine if reaching into the work tools of the attachment. 

 

 

 

 

 

 

 

WARNING

 

Beware of entanglement and crushing hazards especially when cleaning or removing 
blockages. Always stop the attachment by turning the auxiliary hydraulics control lever to 
its neutral position before leaving the driver’s seat, shut down the loader engine and 
release the residual pressure of the hydraulic system to prevent rotating parts from 
moving when clearing a blockage. 

 

 

 

 

 

DANGER

 

Wrong, improper, or careless use of the attachment causes serious risk of severe 
injuries or death.

 Familiarise yourself with the controls of the loader in a safe area. Pay 

particular attention to the safe stopping of the attachment and the loader; follow the safe 
stopping procedure shown in this manual before leaving the driver's seat. 

 

 

 

Summary of Contents for A37265





























Reviews: