6 (26)
3.
Safety instructions for using the bucket
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
WARNING:
Misuse, careless use, or using an attachment that is in poor condition,
may cause risk of serious injuries. Familiarise yourself with the controls of the
loader, correct coupling procedure, and the correct way to operate the attachment at
a safe area. Study especially how to stop the equipment in a safe manner. Read all
safety precautions carefully.
Read all safety instructions carefully before handling the attachment
When attaching an attachment to the loader,
ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader.
Never lift or move an unlocked attachment.
The Silage dispenser is designed to be used by one operator at a time. Do not let
others near the danger area of the equipment when it is in use.
Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
When filling the bucket from a silo keep it securely against the ground and attached
to the loader.
When unlocking and removing the bucket off from the loader, ensure that it is
secured against accidental movement. To prevent the attachment from tipping over,
empty it first and lower it on even surface. Ensure the bucket is supported properly
during storage.
Before starting the dispenser bucket, make sure that there are no foreign objects in
the bucket that could be ejected from the attachment or that could damage the
equipment.
Be sure not to tilt the bucket too far up to prevent material from spilling from the
bucket.
Check the conveyor regularly. Read the instructions on maintenance and servicing
and only use original spare parts.
Fill only with materials that are suitable for use with the distributor bucket. Never fill
with hard or compacted materials.
Using too fine materials may cause spreading of dust. The bucket is not intended for
spreading grain or flour.
Operate the controls of the loader in a slow and calm manner. Be careful when lifting
load to high level or lifting load from high. Avoid sudden changes in speed or
direction to maintain balance of the loader especially when handling heavy loads.
Drive slowly and carefully especially on inclined terrain or slippery surfaces.
