31 (34)
8.5
Splitting wedge
Depending on use, different blade type can be used. The splitter has a standard blade for splitting quarters
and a 6 way blade for bigger logs as an option.
The splitting wedge of the splitter can be
sharpened or replaced, as it wears during use.
Replace the splitting wedge as follows:
1.
Remove the stopper screw (1) and locking
pins (2).
2.
Slide the worn wedge (3) away, and install a
new one.
8.5.1
Maintenance of the splitting wedge
The splitting wedge of the log splitter can be sharpened, as it wears during use. Performing splitting blade
maintenance before each season of use is recommended. Smooth out any unevenness in the blade with an
angle grinder, for example. Use a file for finishing, as necessary.
If the blade has bent or it has been worn down excessively, it must be replaced. Always
use good protective gloves when handling the blade.
8.6
End of life disposal
When the attachment is at the end of its useful life recycle and dispose of the attachment properly. Dismantle
the attachment and separate the different materials, such as plastic, steel, rubber, and oils, for example. Drain
and collect all oils and handle them by following the current local regulations. Never leave any oil or other
material in the environment.
Recycle each material by delivering them to a proper collecting place. Let a waste management company do
the recycling, if possible.
Summary of Contents for 650
Page 2: ...Log splitter 650 2021 1 ...
Page 34: ......
