22 (28)
6.4
Storing the attachment
Uncouple and store the attachment on level ground. The best way to store the attachment is a place where it
is protected from direct sunlight, rain, and extreme temperatures.
Avoid leaving the attachment laying directly on the ground. Place it on blocks of wood or on a pallet, for
example.
Place the multiconnector on to its holder as indicated with an arrow in the figure below. Never leave the
hydraulic connector on the ground.
Make sure that the attachment is secured against all movements during storage.
Never climb on the attachment.
For longer storage periods
touch up the paint where
needed, and oil the visible parts
of the hydraulic cylinder shaft to
prevent rust damage. The
cylinder should be completely
retracted during storage.
6.5
End of life disposal
When the attachment is at the end of its useful life recycle and dispose of the attachment properly. Dismantle
the attachment and separate the different materials, such as plastic, steel, rubber, and oils, for example. Drain
and collect all oils and handle them by following the current local regulations. Never leave any oil or other
material in the environment.
Recycle each material by delivering them to a proper collecting place. Let a waste management company do
the recycling, if possible.
.