3
–
by clients in hotels, motels and other residential type environments;
–
bed and breakfast type environments.
5.
For additional protection, we recommend the use of a power outlet with a rated current of 10A. To
avoid circuit overload, do not operate another high wattage appliance on the same circuit
6.
Never use the device when it does not function properly, shows damage or in the event it has been
dropped.
7.
Only qualified experts may perform repair and maintenance work on the device using original
replacement and accessory parts. Never attempt to repair the device yourself.
8.
Do not leave the product unattended while in use. Always unplug the product from the electrical
outlet when not in use.
9.
Keep the Power Cord and product away from heated surfaces.
10.
Do not place product base in or expose it to water or other liquids.
11.
The use of attachments, including canning jars, not recommended by the manufacturer may cause a
risk of injury to persons.
12.
Handle the Blades with care as they are extremely sharp. Use caution when attaching or detaching
the Blades.
13.
Do not touch moving parts (e.g., the Blades) while the product is in use. Keep hands and utensils
away from the moving blades while operating the product.
14.
Before disassembling the product, unplug it from the electrical outlet and ensure the Metal Shaft and
Blades have completely stopped.
15.
Do not plug or unplug the product into/from the electrical outlet with a wet hand.
16.
Unplug the product from the electrical outlet prior to putting on or removing parts.
17.
Never operate this product if it has a damaged Power Cord or plug, is not working properly, has been
dropped or damaged, or if the Base has been exposed to water or other liquids.
18.
Check that the control is OFF before plugging cord into wall outlet. To disconnect, turn the control
to OFF, then remove plug from wall outlet
19.
Do not place on or near a hot gas or electric burner or in a heated oven.
20.
Do not allow the Power Cord to hang (e.g., over the edge of a table or counter) where it may be
tripped over or pulled.
21.
Always place the product on a flat, level, stable surface.
22.
This product is intended for indoor, non-commercial, non-industrial, household use only. Do not
use outdoors.
23.
To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
24.
Always operate blender with cover in place.
25.
Do not blend hot liquids.
26.
Be certain cover is securely locked in place before operating appliance.
27.
Do not attempt to defeat the cover interlock mechanism.
Unused electrical products should not be disposed of with household waste. Check with your local authority
to find out where you can take your product to be properly recycled.
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
Any servicing should be performed by an authorized service representative.
