8
2 Initial check and cable connections
2.1 Initial check
When you first receive your DVR, please check the following:
1. Please check whether there is any visible damage to the package
appearance. The protective materials used for the package of the DVR can
protect the DVR against most accidental damage during transportation.
2. Please open the box and get rid off the plastic protective materials. Check
whether there is any visible damage to the DVR itself.
3. Please open the machine crust and check the data wire in the front panel,
power wire and the connection between the fan power and the main board.
Front and rear panel
l
The key functions on the front panel and the interface specification for the
real panel are in the specification.
l
Please check the product type described on the front panel whether is the
product type you ordered.
The label on the real panel is very important for after sales service. Please
protect it carefully. If you have to contact us for after sales service, please
provide the product type and serial number from this label.
2.2 Hard disk installation
Before you first use the DVR, please install the hard disk as follows:-
1).
Undo the side screws
2).
Lift off the cover
3).
Screw on the hard disk
4).
Connect SATA power wire
Summary of Contents for Qvis
Page 1: ...AVALON 1 U 4 8 Channel DVR User s Manual ...
Page 2: ......
