20
Step 3
: repeat steps 1 and 2, until you have set out all the preset designated
cruise positions
Remove Preset
: Please input the preset value in the blank, click Remove Preset
button, then remove the preset points.
Remove Cruise Line
: Input the number of cruise line, click Remove Cruise Lines
button, then remove the cruise lines set.
Picture 3.13 Cruise Between Points Setting
s
2). To view Cruise between Points
In Picture 3.10, click the Page Shift button to enter the PTZ control menu as
shown in Picture 3.12. Please input the patrol number of the cruise in the value
blank, then click the Cruise between Points button. The PTZ will cruise from point
to point on the cruise line. Click the Stop button to stop the cruise.
3: Scan
The PTZ can also work on the preset scan line repeatedly.
1). Scan setup
Step1
: In Picture 3.10, click the Setup button, which takes you to Picture 3.14;
Step2
: Click the Pattern button and input a patrol value in the pattern value
blank;
Step3
: Click the begin button and enter Picture 3.10, here you can set the
following items: Zoom, Focus, Aperture, Direction and so on. Click Set button to
go back Picture 3.14;
Step4
: Click the End button to complete the setup, Click the right button of the
mouse to exit.
Picture 3.14 Scan Setup
Summary of Contents for Qvis
Page 1: ...AVALON 1 U 4 8 Channel DVR User s Manual ...
Page 2: ......