Then it will be simply required to fix the plate on the T-pod, by using the two countersunk
stainless screws provided, screwing it in the teo M10 threated holes circled
Figure 1
Figure 2
The following are the steps necessary to install the M-zero LHQ mount on a T-Pod tripod:
Unscrew the azimuth adjustment knobs a few
turns by rotating the azimuth adjustment
knobs in opposite directions.
Put the mount on the base plate so that the
brass adjustment plug projecting up from the
plate will fit in the proper space between the
two azimuth adjustment screws.
©
All Rights reserved
14
