9
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS
1)
Power On and Off
- Press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the unit off.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Air Condi-
tioner, Dehumidifier, Fan only mode. Each press of the MODE button will light up a different icon on the
control panel. the exhaust hose and window kit must be installed when the unit is in Air Conditioner, De-
humidifier mode. When using the unit as a fan, it is not necessary to keep the exhaust hose and window kit
connected to the unit..
3)
Temperature
- Select the desired temperature by pressing either -
or
+
key when using the unit in
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-
perature is set, the unit will display this temperature setting until it is changed by the user. The temperature
indicator display shows temperature in Celsius or Fahrenheit. Press the -
and
+
simultaneously to change
between Celsius and Fahrenheit .
4)
Bucket Full
- when the unit can not evaporate the collected moisture fast enough. The excess water will
collect in a backup water tank located inside the unit. The bucket full
icon
will
light
up
if
this
occurs
.
5)
Louver Direction
- This unit has 4-way directional louvers. Use the louver guides manually to direct air
where cooling or fanning is needed most.
POWER BUTTON
MODE BUTTON
TEMPERATURE AND TIMER
INDICATOR
BUCKET FULL
TIMER/TEMP DECREASE
TIMER/TEMP INCREASE
AIR CONDITIONER MODE
DEHUMIDIFIER MODE
FAN MODE
