6
PARTS & ASSEMBLY
PARTS
EXHAUST HOSE
WINDOW KIT
ASSEMBLY & INSTALLATION
INSTALLATION
When the unit is operating as an air conditioner or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air
out of the room to complete the air exchange. When the unit is operating in fan mode no outdoor air exchange takes
place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan.
NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 7 ft. long
(approximate length).
MOUNTING THE EXHAUST HOSE
Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove
packaging and locate components.
Extend both ends of the exhaust hose approximately 6 inches.
Screw the window kit adapter onto one end of the exhaust hose counter-clockwise. Screw the hose
adapter onto the other end of the exhaust hose counter-clockwise.
Slide the hose adapter of the exhaust hose down arrow over the discharge opening on the back of the unit.
Open the window or door and adjust the length of window kit to fit the opening. Then make the kit fixed.
Attach the window kit adapter of the exhaust hose to the window kit.
Window Kit Adapter
