4.1 Safety
Guidelines
Chapter - 4
This chapter contains information to prevent personal injury when installing the
display and precautions to prevent damage to the display. Before installing the
CR OR Series, please ensure that you understand and follow the safety guidelines,
safety instructions and warnings in this section.
In this manual, the “CR OR Series” contains the following products from the
company: for OUTDOOR Use: CR-OR 2 ‘’ P2,6’’ to CR-OR 4 ‘’P4,81’’
4.1 Safety Guidelines
Personal Protection
：
•
Warning: Make sure that you understand and follow all safety guidelines, safety
instructions, warnings and precautions in this manual.
•
Warning: Pay attention to the hanging load of the flykits.
•
Warning: When installing the cabinet, wear a helmet to avoid the risk of personal injury.
•
Warning: Pay attention to your fingers when installing the cabinets.
For Installer
：
•
The display installer must be a trained, qualified, and experienced technician.
•
The floor to be installed must be flat and smooth.
•
Console should be used in the installation area
Security Tips:
•
CR OR series are in line with international safety standards and information
technology equipment safety standards, certified with CE and its parts
and components meet safety standards. Please pay attention to safety warning
signs when using to avoid dangerous situations such as electric shock.
SAFETY
FIRST
Warning
：
•
Please read the installation instruction carefully before installing the display to
avoid the risk of injury to the user;
•
Spare parts are used to replace broken parts, such as power lines, data lines,
Sending boxes, etc. Parts for other manufacturer’s products are not allowed to
be used on the CR OR Series;
•
Please follow the assembly instructions when installing the cabinet. If you
encounter any problems during the installation, please contact AVA LED in time.
Product Care
•
The cabinet should be kept dry and clean. It is recommended that users conduct
safety inspections and visual inspection on all products regularly; checking
whether the cables and LED lamps are damaged or not. The damaged part
needs to be repaired or replaced in time.
