AV TOOL AVT-3420, Instruction Manual

Page: 9 / 19

9
4.1 Connecting the AVT-3420 to an Antenna
ƒ Take the AVT-3420 from the shipping carton and place it upright or
horizontally next to your CRT or LCD display.
ƒ Connect the Antenna or CATV cable to the “CABLE IN” of the back panel of
the AVT-3420.
ƒ Connect the HD-15 VGA Cable from the CRT or LCD display to the HD-15
VGA connector labeled to “TO MONITOR” on the back panel of the AVT-3420
ƒ If you are using the IR extender function, connect it to the IR Ext jack at this
time.
NOTE: Fasten the HD-15 screws. It is very important to fasten the screws.
Loose connections can cause distortion of the Picture.
ƒ Take the 3.5mm connector from your Multimedia speaker and connect it to
“SPEAKER” on the back panel of AVT-3420.
ƒ Take the AC/DC adaptor from the shipping carton and connect the Adaptor
first to the +5VDC input on the AVT-3420 and then to the AC socket.
ƒ Turn on the Power to the AVT-3420 and to the CRT or LCD.
ƒ Press the Input Source button on the AVT-3420, the remote control or the
OSD to select the input.
4.2 Connecting the AVT-3420 to a Computer and Antenna
ƒ Connect the Antenna or CATV cable to the “CABLE IN” of the back panel of
the AVT-3420.
ƒ Connect the HD-15 VGA Cable from the CRT or LCD display to the HD-15
VGA connector labeled to “TO MONITOR” on the back panel of the AVT-
3420. Connect the supplied VGA cable from the Monitor Out port on your
computer to the VGA In port on the AVT-3420.
NOTE: Fasten the HD-15 screws. It is very important to fasten the screws.
Loose connections can cause distortion of the Picture.
ƒ Take the 3.5mm connector from your Multimedia speaker and connect it to
“SPEAKER” on the back panel of AVT-3420.
ƒ Take the AC/DC adaptor from the shipping carton and connect the Adaptor
first to the +5VDC input on the AVT-3420 and then to the AC socket.
ƒ Turn on the Power to the AVT-3420 and to the CRT or LCD.
ƒ Press the Input button on the AVT-3420, the remote control or the OSD to
select the input.