6
Understanding the Display
The Clock Area shows the Date, Time and Day of the week
.
Pressing and holding the CLOCK button with the unit off allows these parameters to be
scrolled through and changed using the TIME UP & DOWN buttons to increase and de-
crease the setting and the CLOCK button to scroll to the next function. After setting the
date, time and day of the week press RESET to leave the programming mode.
The Mode Area shows which mode the unit is currently set to work in.
This is set using the MODE button on the controller.
Automatic mode allows the unit to automatically select heating or cooling in
order to maintain the desired room temperature. For your comfort we rec-
ommend setting the temperature to between 22 & 24C in automatic mode.
Cooling Mode allows cooling to be used to prevent the room temperature
exceeding the set temperature during summertime use. For your comfort we
recommend not setting the desired temperature below 22C in cooling mode.
Dry or Dehumidification Mode uses the units cooling function to reduce the
humidity in the room. It is designed to make the room comfortable with
reduced energy consumption compared with cooling mode.
Fan Only Mode uses the indoor fan to generate air movement within the
room but without cooling or heating the room. It is often used to prevent a
room getting ‘stuffy’
Heating Mode allows heating to be used to prevent the room temperature
dropping below the set temperature during winter use. For your comfort we
recommend not setting the temperature above 24C in heating mode.
11
What do you want the unit to do?
Pressing the mode button scrolls between automatic, cooling, dry, fan
only and heating modes. Choose the mode most appropriate to your
needs.
•
Automatic will engage whichever mode is necessary to maintain
the set temperature
•
Cooling will cool the room down to the set temperature
•
Dry will remove moisture and cool the room down.
•
Fan Only will give air movement in the room without heating
and cooling
•
Heating will heat the room up to the set temperature
Note—the unit will only be able to reach the set temperature if it is powerful enough to
do so. Your air conditioner is not designed to cool a room down to 20C or less for long
periods or heat it up to 25C or more for long periods and, depending upon the heating
or cooling requirements of your room may be unable to do so at all.
Setting the Set Temperature
Use TEMPERATURE UP & DOWN to increase or decrease the set tem-
perature to the required level. We recommend between 22C & 24C for
an optimum comfort level.
Setting the Auto Swing Louver
Press SWING while the unit is operating to start or stop this function.
Setting the Indoor Fan Speed
Press FAN while the unit is running to increase or decrease the indoor
fan speed or choose automatic fan speed to let the unit choose the
most appropriate.
Setting the Keyboard Lock
Press and hold RESET for six seconds to turn the keyboard lock on
and off.
