AUX AMW-NFH 14, Owner'S Manual

Page: 62 / 76

62
*
increase by 1 ℃ and each time the “ ” is pressed, it will
decrease by 1 ℃ .
*
The temperature setting ranges from 16 ℃ (60 ℉ ) ～ 32 ℃ (90 ℉ ).
Note: The temperature cannot be set in AUTO or FAN mode, thus
these two buttons are not functional.
Each time the “ ” is pressed, the temperature setting will
8 .
or
7. HEALTH / iCLEAN
This function performs a self cleaning the indoor unit. When the 'iClean' function is
activated, the unit operates initially mode cooling fan at low speed during this period
condensing water entrains the powder battery. then the unit switches to heating
mode the fan at low speed, to dry the battery inside the unit. Finally the drive
switches to cooling to finish completely dry.
This button also serves to remove the reminder cleaning air filter, code
'CL' which is activated when the machine reaches the cumulative
operating 360h. Press 10 times the 'HEALTH' button to remove the counter.
To turn off the meter, press the 'HEALTH' button 5 times.
AUTO COOL DRY HEAT FAN
*
Press this button, you can select the running mode as follows:
Note: HEAT mode is not available for cool only units.
10 . MODE
9 . TURBO
*
on or off to speedy the cooling or heating.
*
When TURBO is on, the air speed is HIGH.
*
When TURBO is off, the air speed will restore to previous
status.
Press this button only in COOL or HEAT mode to set TURBO