AUX AMW-NFH 14, Owner'S Manual

Page: 49 / 76

5. Drain joint installation
Seal
Drain joint
Base pan hole of
outdoor unit
Seal
Drain pipe
(1)
(2)
Fit the seal into the drain joint, then insert the
drain joint into the base pan hole of outdoor unit,
。
rotate 90 to securely assemble them.
Connecting the drain joint with an extension drain
hose (Locally purchased), in case of the water
draining off the outdoor unit during the heating
mode.
NOTE: The drain joint differ from appliance
to appliance.
-
6 . Start up and performance testing
Prior check s
Measure the voltage supply and make sure it is within the specified range.
Testing must be performed in all modes of operation.
To operate in cool mode, press the ON/OFF button of the remote controller to place the unit in
-
-
cooling mode and select a temperature below room temperature.
To operate in heat mode, press the ON/OFF button of the remote controller to place the unit in
-
heating mode and select a temperature above room temperature.
You can also check the manual button. This is used when you do not have the remote controller and
-
and is located under the front panel.
49