AuviTran Audio ToolBox AVBx3, Instruction Manual

Page: 9 / 21

AuviTran Audio ToolBox Instructions Manual 9
5 Technical SPECIFICATIONS
AVBx3: 3 slots AuviTran Audio ToolBox 1U x 19” rack
Size 483 x 253x 44 mm (19” rack, 1 U height)
Three slots available for control and audio inputs/outputs
Main Power Supply 100-240 VAC – Maximum 50 W (depending of the configuration)
Auxiliary Power Supply Available only in option
Storage: Temp / Humidity -5°C to 70°C / 0% to 95% (non-condensing)
Operating: Temp / Humidity 0 °C to 40°C / 5% to 90% (non-condensing)
Front panel (LED display) Power Main/ Aux – Fault / Error / Ready – Networks and links Rx and Tx Activities - Events
Rear panel 
3 slots with backplane bus for interface cards

1x IEC power inlet for main AC power supply

2x BNC connectors for Word clock Output and Input (Zin=1KΩ or 75Ω selected by software)

1x6 poles Euroblock connector for GPIO
GPI/O Connector Euroblock 6 poles with

GND and Power DC Output 12V (250mA max)

4 GPI/O configurable individually as GPO or GPI
o
GPI = can be set as ADC level input (8 bits 0-12V) for fader control or level trigger detections
o
GPO = when active, force 0V (GND) on the output (support 60Vmax / 500mA max)
AVBx7: 7 slots AuviTran Audio ToolBox 2U x 19” rack
Size 483 x 253x 88 mm (19” rack, 2 U height)
Seven slots available for control and audio inputs/outputs
Main Power Supply 100-240 VAC – Maximum 110 W (depending of the configuration)
Auxiliary Power Supply Available only in option
Storage: Temp / Humidity -5°C to 70°C / 0% to 95% (non-condensing)
Operating: Temp / Humidity 0 °C to 40°C / 5% to 90% (non-condensing)
Front panel (LED display) Power Main/ Aux – Fault / Error / Ready – Networks and links Rx and Tx Activities - Events
Rear panel 
7 slots with backplane bus for interface cards

1x IEC power inlet for main AC power supply

2x BNC connectors for Word clock Output and Input (Zin=1KΩ or 75Ω selected by software)

1x6 poles Euroblock connector for GPIO
GPI/O Connector Euroblock 6 poles with

GND and Power DC Output 12V (250mA max)

4 GPI/O configurable individually as GPO or GPI
o
GPI = can be set as ADC level input (8 bits 0-12V) for fader control or level trigger detections
o
GPO = when active, force 0V (GND) on the output (support 60Vmax / 500mA max)