AuviTran Audio ToolBox Instructions Manual
14
9
AUDIO TOOLBOX CONTROL PANEL
All AuviTran Audio Toolbox have a control panel used to display quick information on the device status without the need to
launch any software.
Control panel is available both in stage box mode and installation mode. Information provided are the same.
AuviTran AVBx3 Stage box control panel display
AuviTran AVBx7 Stage box control panel display
LED activity meaning:
-
Event: reflects Core or slot event.
-
Activity: reflects core activity, network activity or audio signal presence
-
Fault: Default found on ToolBox
-
Error: Malfunction detected
-
Ready: ToolBox is ready to be used
-
Power: Power supply is OK
-
Main: Main power supply present
-
Aux: Auxiliary power supply present
A reset button
is also available to be used with a paper clip. Two functions can be obtained through pressing this button:
-
Reset ToolBox: press button for two seconds. Device will restart as if powered on.
-
Revert to Factory default: while powered off, press button and powered on device. Continue
pressing button until all panel LED are lighted. Both ToolBox and all slots will then reverted to their
factory default values.
Note: Use “Revert to Factory” function with care as it will reset all ToolBox and slot parameters, and might lead to strange
behavior on the network used.
