%6
2SHUDWRUVKDQGERRN
3%6)(('RF/13.03.00
9
Autronica Fire and Security AS
$OOWKHDODUPVRXQGHURXWSXWVIURPWKHFRQWUROSDQHOZLOOEHWXUQHGRIIZKHQWKH
RSHUDWLRQNH\³6,/(1&(5(6281'6281'(56´EXWWRQLVSUHVVHGWKHILUVW
WLPH+RZHYHUWKHPHVVDJHWRWKH)LUH%ULJDGH)LJKWHUV%0$LVQRWWXUQHGRII
'
),5(OLJKWVZLWKDVWHDG\OLJKW
See section 4 if the lamp MORE ALARMS lights.
When the scene of the fire is investigated and the necessary actions are
carried out, reset the fire alarm control panel to normal condition.
(
3UHVV³5(6(7´
The following text will appear in the display:
5(6(7352&('85(,1352*5(66
:$,7
This text will remain for 60 seconds.
(The seconds are counted in the display with one point appearing for every second
from 0 to 30 seconds, and then the following 30 seconds are counted down by the
removal of one point every second from 30 to 0.)
If everything is normal the following text will appear in the display:
5(6(72.
1250$/&21',7,21
)
&ORVHWKHGRRU
Normal condition means that the door on the control panel is closed and only the
MAINS lamp is lit.
After resetting, an address may still be in an alarm state. This can be due to
mechanical damage, water damage, presence of smoke still in the detector’s
chamber or an technical fault.
If there is any address in an alarm state after resetting, it will be automatically
disabled and isolated from the rest of the system.
The following text will appear in the display:
$/$50$''5(66(6,6',6$%/('
&21752/3$1(/,1$%1250$/&21',7,21
Contact Autronica’s service department to repair any fault so that the detector(s)
can return to normal condition.