Instructions, AutroFlame X33AFPL, 116-P-X33AFPL/IGB, rev . A, 2016-11-04
P/N 95-8750 v2 .4, rev . 1/16
Autronica Fire and Security AS
Page 10
SPECIFICATIONS
OPERATING VOLTAGE—
The BSD-340 PowerLoop driver provides the power . The
operating voltage is 20 to 30Vdc .
POWER CONSUMPTION—
Without heater: 4 watts at 24 Vdc nominal;
5 .2 watts at 24 Vdc in alarm .
4 .5 watts at 30 Vdc nominal;
6 .5 watts at 30 Vdc in alarm .
Heater only:
8 watts maximum .
Total power:
14 .5 watts maximum
POWER UP TIME—
Fault indication clears after 0 .5 second; device is ready to
indicate an alarm condition after 30 seconds .
TEMPERATURE RANGE—
Operating: –40°F to +167°F (–40°C to +75°C) .
Storage:
–67°F to +185°F (–55°C to +85°C) .
Hazardous location ratings from –55°C to +125°C .
HUMIDITY RANGE—
0 to 95% relative humidity, can withstand 100% condensing
humidity for short periods of time .
CONE OF VISION—
The detector has a 90° cone of vision (horizontal) with
the highest sensitivity lying along the central axis . Unlike
conventional detectors, the X33AF PL provides full
coverage at a minimum of 70% of the maximum detection
distance .
Perfect cone of vision for methane fire detection — 100
feet (30 .5 m) on and off axis on “very high” setting .
Refer to Appendix A for FM Approved cone of vision data .
RESPONSE TIME—
Typical response times are under 10 seconds . Models are
available that can respond to automotive paint gun fires in
under 0 .5 seconds . See Appendix A for actual response
times .
DIMENSIONS—
See Figure 6 .
ENCLOSURE MATERIAL—
Copper-free aluminum (painted) or stainless steel (316/
CF8M Cast) .
VIBRATION—
Conformance per FM 3260: 2000, MIL-STD 810C (Curve
AW), DNV Note 2 .4 (Class B) .
WIRING—
Field wiring screw terminals are UL/CSA rated for up to
14 AWG wire, and are DIN/VDE rated for 2 .5 mm2 wire .
Screw terminal required torque range is 3 .5–4 .4 in .-lbs .
(0 .4-0 .5 N·m) .
Important: 18 Vdc minimum must be available at the
detector . For ambient temperatures below –10°C (14
°
F)
and above +60°C (140
°
F) use field wiring suitable for both
minimum and maximum ambient temperature .
THREAD SIZE—
Conduit connection: Four entries, M25 .
Conduit seal not required .
SHIPPING WEIGHT (Approximate)—
Aluminum:
7 pounds (3 .2 kilograms) .
Stainless Steel:
13 .8 pounds (6 .3 kilograms) .
Mounting Arm (AL): 6 pounds (2 .75 kilograms) .
Mounting Arm (SS): 14 pounds (6 .4 kilograms) .
WARRANTY PERIOD—
5 years.
10.0
(25.4)
4.8
(12.2)
4.7
(11.9)
B2067
Figure 18—X33AF PL Dimensions in Inches (cm)
Summary of Contents for AutroFlame X33AF PL
Page 4: ......
Page 36: ...www autronicafire com ...
